NEW · DualSoft MCP in action · 60 seconds

An AI saw only the camera feed, wrote the control logic and ran the real equipment

Nobody wrote control code by hand or clicked through operator screens. The AI called the functions it needed through DualSoft MCP, built and applied the control logic, and the demo equipment ran automatically.

60 seconds · live camera on a real demo kit · published November 11, 2026Watch on YouTube

Four scenes in the video

Click a time to play from that scene.

  1. Live auto run with predictive AR

    A 0.35-second predictive AR overlay sits on the live camera while carriers circulate non-stop.

  2. Four live views

    Switch between side-by-side (1:1), camera only, virtual twin and AR overlay without stopping the automatic run.

  3. 3D digital twin

    Watch cylinder and lift motion from an isometric 3D angle, then expand any view to a full-screen wallboard in one click.

  4. Camera ↔ PLC ladder 1:1

    Click a moving unit in the live camera on the left to jump to its live PLC ladder rung on the right.

What the AI and DualSoft MCP did

01

See through the camera

The AI works out the layout and motion of the equipment from the camera feed. The connected AI does the viewing; the DualSoft MCP server never receives the video.

02

Write the control logic

The AI writes a DS process model; DualSoft MCP compiles it, verifies the run and returns the evidence.

03

Run it on real equipment

The verified logic is applied to the PLC and the equipment runs automatically. Connecting to, writing to and deploying on a PLC require verified owner credentials.

On-screen text

The video has no voice-over. Each part opens with a title card and keeps a caption bar at the bottom.

TimeOn-screen text
0:00PART 01 · Live Auto Run & AR OverlayContinuous Physical Auto Circulation with Full-Height Predictive AR Overlay
Fold the bottom control deck so the live camera feed and 0.35s predictive AR overlay fill the screen while carriers circulate non-stop.
0:14PART 02 · 4 Live Visual ModesInstant View Switching: Side-by-Side (1:1) · Actual Camera · Virtual Twin · AR Overlay
Compare the physical Demo Kit and the real-time PLC digital twin across 4 intuitive display modes without interrupting Auto operation.
0:29PART 03 · 3D Isometric Twin & Fullscreen3D Isometric Digital Twin Perspective & One-Click Fullscreen Wallboard Mode
Inspect 3D cylinder and lift motion from an isometric angle and expand any active display mode to 100% fullscreen.
0:43PART 04 · Finale · 1:1 Ladder Twin View1:1 Ladder Twin View (Left 50% Live Hardware ↔ Right 50% PLC Ladder) & Click-to-Rung Sync
Click any moving equipment unit on the left camera to jump straight to its live PLC Ladder rung on the right in real time.

Questions and answers

What is DualSoft MCP?

An MCP server that lets AI tools such as Claude, ChatGPT or Cursor call DS Studio directly. The web address https://dualsoft.ai/mcp serves the official documentation, starter examples and the 3D equipment library read-only; the local MCP installed on your PC also compiles a process model and verifies its run.

How do I connect?

Add https://dualsoft.ai/mcp in the MCP (connector) settings of your AI tool. Searching and reading the documentation and the starter example work without a key, and opening the same address in a browser shows a connection guide. Compiling and verifying your own model runs in DS Studio PLAY (inside your browser) or through the local MCP.

Can the AI change a real PLC on its own?

No. The public features at the web address are read-only (documentation, starter examples, library lookup). Connecting to, writing to and deploying on a PLC require verified owner credentials.

Does the camera video go to DualSoft’s server?

No. The AI you connect watches the video; the MCP server does not receive photos or video. The public features at the web address are read-only, so your process source is not sent to the server either.

What equipment is in the video?

A demo kit with a conveyor, stoppers, clamps and pushers, filmed with a live camera on November 9, 2026. The screen shows the real camera, predictive AR, a 3D digital twin and the PLC ladder side by side.

Can we use it on our own equipment?

Email your equipment type and goal to help@dualsoft.com and we will review the scope with you. To try it first, open an example in DS Studio PLAY or describe a sequence in words and simulate it with an HMI and 3D, no real PLC needed.

Connect your AI tool now

One MCP address is all it takes. For your own equipment, talk to us by email.

https://dualsoft.ai/mcp
help@dualsoft.com